Building finishes0401
Interior painting
Repaint a defined set of indoor walls, with a written preparation and colour schedule.
Guide + operating toolsExplore →
THE KENYA COLLECTION
Building finishes
Compare the work, the buyer and the first deliverable.
MAKE YOUR NEXT MOVE
Building finishes
20 guides · Kenya
Edition 4.2 · Operating-pack drafts · Checkout not open yet
Building finishes0402
Exterior painting
Provide exterior repainting for a measured, safely accessible facade.
Guide + operating toolsExplore →
Building finishes0403
Decorative wall finishes
Create one approved textured or decorative wall feature.
Guide + operating toolsExplore →
Building finishes0404
Wallpaper installation
Install customer-approved wallpaper with a defined repeat and join plan.
Guide + operating toolsExplore →
Building finishes0405
Vinyl flooring installation
Supply or fit a specified vinyl floor over an assessed substrate.
Guide + operating toolsExplore →
Building finishes0406
Laminate flooring fitting
Fit customer-approved laminate flooring and matching trims.
Guide + operating toolsExplore →
Building finishes0407
Tile installation
Lay an approved tile pattern for a measured floor or wall.
Guide + operating toolsExplore →
Building finishes0408
Tile repair service
Replace isolated damaged tiles while identifying visible underlying defects.
Guide + operating toolsExplore →
Building finishes0409
Terrazzo polishing
Restore the appearance of existing terrazzo through a defined polishing service.
Guide + operating toolsExplore →
Building finishes0410
Epoxy floor coating
Install a specified epoxy floor coating through competent applicators.
Guide + operating toolsExplore →
Building finishes0411
Gypsum ceiling fitting
Fit a designed gypsum ceiling for a measured non-structural interior scope.
Guide + operating toolsExplore →
Building finishes0412
Acoustic panel installation
Supply and install specified acoustic panels without promising studio-grade isolation.
Guide + operating toolsExplore →
Building finishes0413
Wall cladding installation
Fit an approved decorative cladding system to a defined wall.
Guide + operating toolsExplore →
Building finishes0414
Kitchen cabinet refacing
Refresh cabinet doors and exposed surfaces while retaining sound carcasses.
Guide + operating toolsExplore →
Building finishes0415
Built-in wardrobe fitting
Design and fit a measured wardrobe with an approved internal arrangement.
Guide + operating toolsExplore →
Building finishes0416
Bathroom accessory fitting
Fit non-structural bathroom accessories to an approved position schedule.
Guide + operating toolsExplore →
Building finishes0417
Glass partition fitting
Coordinate measured glass partitions with qualified supply and installation.
Guide + operating toolsExplore →
Building finishes0418
Decorative concrete casting
Cast small non-structural decorative concrete items from approved samples.
Guide + operating toolsExplore →
Building finishes0419
Paving block installation
Install paving blocks to an approved site and drainage design.
Guide + operating toolsExplore →
Building finishes0420
Roof leak repair
Investigate and repair a clearly identified roof leak through competent roofers.
Guide + operating toolsExplore →