KENYA · GUIDE 0263 · EDITION 4.7
Chef uniform stitching in Kenya: Pricing, Costing and Cash Flow Example
Editorial update: 28 October 2026 · Business planning reference · Review scope
Use one accepted sale unit throughout
Work through a fictional KSh 16,800.00 invoice against KSh 7,290.00 of selected cost lines; distinguish the invoice from collected cash.
This is a planning reference for chef uniform stitching. The order below is an invented teaching case. It is not a completed customer job, an operating approval or a prediction of demand or earnings.
The example offer and its boundary
Fictional CHEF-263 stitches six ordinary chef-jacket-and-apron sets C01–C06, twelve pieces, using 24 m customer-owned fabric subject to actual layout. C03 approved jacket flat chest 58 cm, back length 76 cm and sleeve from shoulder seam 62 cm; apron bib-to-hem 85 cm. Client supplies kitchen appearance/laundering requirements. No flame, scald or chemical-protection certification is offered.
Charging basis to confirm: uniform item or set. The rates and quantities below are teaching assumptions. Even a previously recorded listing is not adopted here as a current quotation or an earnings forecast.
Itemised arithmetic
| Selected input/activity | Quantity | Assumed unit rate | Selected cost |
|---|---|---|---|
| Jacket closure set, each | 6 | KSh 150.00 | KSh 900.00 |
| Apron ties/trims, each | 6 | KSh 80.00 | KSh 480.00 |
| Thread use, metre | 1200 | KSh 0.30 | KSh 360.00 |
| Pack/card, each | 6 | KSh 25.00 | KSh 150.00 |
| Cut stitch fit labour, hour | 24 | KSh 220.00 | KSh 5,280.00 |
| Machine energy, kWh | 4 | KSh 30.00 | KSh 120.00 |
| Calculation | Teaching result |
|---|---|
| Selected cost total | KSh 7,290.00 |
| Priced/accepted output | 6 example units |
| Assumed selling price | KSh 2,800.00 |
| Assumed invoice | KSh 16,800.00 |
| Difference before excluded costs and tax | KSh 9,510.00 |
Listed cost KSh 7290.00; cost/unit KSh 1215.00; hypothetical receipts 6×2800=KSh 16800.00; residual KSh 9510.00. This is not net profit. Tax, premises, permits, insurance, equipment acquisition/depreciation and unlisted fixed costs remain unresolved. Confirm actual stock, accepted yield, labour and delivered charges before pricing. Reusable tools are existing resources; full-pack cash may exceed allocated consumption. This rewritten example is a stitching/trims service using separately receipted customer-owned fabric. Fabric purchase is excluded; the stated metres are intake examples, not proven cutting yields. No revenue is earned for unaccepted rework items.
Check cash timing and a weaker outcome
TRAINING-0263: a fictional order for the scoped offer in section 01, using 6 priced units at KSh 2,800.00 each. Buyer group: Restaurants, caterers and culinary trainees. No buyer was contacted and no order was completed.
Teaching invoice = 6 x KSh 2,800.00 = KSh 16,800.00. The selected input lines in section 06 total KSh 7,290.00; their difference from this assumed invoice is KSh 9,510.00 before excluded costs and tax.
For cash-timing practice only, suppose a buyer pays a 30% advance of KSh 5,040.00. The invoice balance is KSh 11,760.00. If the selected input bill is paid before the balance arrives, additional cash of KSh 2,250.00 is needed after applying the advance. The advance is counted once, not again at final collection.
On full collection, total receipts are KSh 16,800.00. Cash against the selected example bill is KSh 9,510.00 before other payments. If a hypothetical 10% increase in the largest selected line (Cut stitch fit labour, hour) adds KSh 528.00, the unchanged invoice leaves KSh 8,982.00 against that revised bill.
If the customer instead leaves 10% of the invoice unpaid, KSh 1,680.00 is a receivable. Cash collected is KSh 15,120.00 and collected cash less the selected bill is KSh 7,830.00. This differs from invoice margin; do not spend the unpaid amount as though it is already cash.
The scenario is complete only as a teaching record of the stated lines. Add actual excluded startup and operating costs using file 12, and replace every assumed rate before relying on a quote. Use measured accepted output for the actual invoice; unaccepted output is not automatically chargeable.
For an actual quote, add all relevant excluded costs, use measured accepted output, and compare amounts from the same period. An unpaid invoice balance is not available cash. A deposit held for an uncompleted obligation is not automatically earned income.
References and their limits
About Product Size Chart and Measurement — UNIQLO Malaysia
Finished-garment measurements differ from body measurements and label sizes; retailer methods below are explicitly defined for the job, not universal brand sizing. Reference check recorded 2026-10-26.
Fine Tailoring — Coats
Manufacturer reference for thread and construction choices; actual machine, fabric, needle and seam sample must be assessed by competent sewer. Reference check recorded 2026-10-26.
Seam appearance — AMANN
Puckering, needle damage and thread-balance diagnostics; visual inspection is not laboratory strength certification. Reference check recorded 2026-10-26.
Care symbols — GINETEX
Interpret actual care instructions and treatment limits; no permission to invent a missing label or copy protected symbols for commercial labelling. Reference check recorded 2026-10-26.
Recorded references support only the scope stated beside them. They do not prove current supplier stock, a local quotation, actual buyer demand, operator competence or the feasibility of this particular business. Later editorial changes do not refresh earlier source-check dates.
Prepared by Business Starter Guides using AI-assisted drafting and desk editorial checks. Independent operator trials and specialist certification are not claimed. See the editorial method for the review scope.
Editorial method and evidence limits